News

How do you know if you have chosen a good welded mesh? The second place is to look at the adhesion of the surface coating. The quicker way to identify it is to cut a small section and then use a hammer to smash it (a bit violent, the effect is faster), see if it will fall off the whole piece, see the coating and Whether the galvanized material inside is completely bonded together, if the layer is peeled off, it is a problem in the manufacturer's spraying process. Many consumers have a question - whether the welded mesh will fade after a long time, in fact, the problem is very simple, as long as the effect of the coating is good, the coating on the welded mesh will not fade.

The use of high-quality welded wire mesh in the construction of buildings and other industries has the following characteristics:

Welded wire mesh is made of high-quality stainless steel wire, which is more resistant to acid, alkali, welding, beauty and versatility.

1. Improve construction speed: improve efficiency by about 70%;

2, the construction process is simple: guided by a special person, the construction personnel can fully grasp the construction process of the steel welded mesh within one to two hours;

3. Saving steel: Calculated by the principle of equal strength replacement, it can be known that it can save 41.67% of steel. Considering the factors such as lap joint and minimum reinforcement ratio when using welded steel mesh, it can save more than 30% of steel;

4. Improve the quality of the engineering structure: the surface of the welded steel mesh is ribbed, and it is bonded with concrete and anchored reliably. The bond strength is equivalent to more than 3 times that of the smooth steel bar, and the integrity is good, the deviation is small, and the crack resistance is improved by more than 75%. ;

5, after the use of welded wire mesh to help the industry to improve economic efficiency: compared to the ordinary lashing steel mesh increased by about 15%.

In addition to the above high-quality characteristics, the quality of the welded wire mesh can also be seen from the appearance of the brightness and gloss of the surface of the welded wire mesh.