The opening of the screen printing mesh is an important parameter. So what is it?
The opening of the screen is an important parameter used to describe the mesh width, aperture, and mesh size. The opening degree of the screen has a great influence on the fineness of the screen print pattern and the text. The degree of opening actually represents the width of the mesh, expressed as the square root of the area of the mesh surrounded by the warp and weft of the net (usually in microns, 1 micron = 1/1000 mm). Therefore, the longer the length of one side of the mesh, the greater the opening.
Introduction to the thickness of screen printing
meshs.
Screen Printing mesh Thickness The distance between the surface of the screen and the bottom surface is typically measured in millimeters (mm) or micrometers (μm). The thickness should be the measured value when the screen is left in a state of no tension. The thickness is determined by the diameter of the constituent mesh.
Screen thickness. The thickness of the screen refers to the distance between the surface of the screen and the bottom surface, and is generally measured in millimeters (mm) or micrometers (μm). The thickness should be the measured value when the screen is left in a state of no tension, and the thickness is determined by the diameter of the wire constituting the screen, and the amount of ink passing through the screen is related to the thickness.
The screen printing mesh is to help print products, and the choice of a good printing mesh can guarantee good quality prints. Help factory owners increase their income.
More popular articles
Leave a Comment