The manufacturer of stainless steel wire mesh is an important process of stainless steel wire mesh weaving project. Its task is to make the warp and weft yarns interweave with each other on the loom according to the technological requirements of the stainless steel wire weaving screen organization.
The forming process of the stainless steel wire mesh on the loom is quite complicated, and it is completed with the organic cooperation of the following several process procedures.
1. Opening: The warp wire moves vertically up and down according to the process requirements of the metal screen to form a nick.
2. Weft guide: Introduce the weft wire into the formed nick.
3. Beating: beat the introduced weft to the weave.
4. Take-up: roll the woven metal screen onto the roll roll.
5. Let-off: With the formation of the metal screen, the warp threads are continuously drawn from the warp beam.
The stainless steel wire mesh is very simple to form the stainless steel wire mesh congestion during the application process. In summary, there are the following congestion by the impurities of the filtering material, which is rich in many particles that are close to the stainless steel wire mesh. Second, the spherical particles may be For materials with multiple touch points on the screen mesh, it is simple and convenient to say that the congestion mesh is due to the large size of the contact surface or the surface of the object; 3. The material has fibrous materials; there are more flake particles; Stainless steel wire mesh congestion; Fourth, the thicker screens such as rubber screens, the hole shape planning is unreasonable, did not reach the upper and lower, causing particles to get stuck. Because most of the material particles to be screened are irregular, because of this, the congestion end is also multi-end. When the particle size of the material is finer, the mud content is more, and the sieving particle size is more than an hour, the congestion of the stainless steel mesh will have a voting effect.
More popular articles
Leave a Comment