News

There are many aspects that can be used in stone cage meshs. For example, the protective safety net on the 

river dam, etc. will be applied in all aspects. How to install the welded wire mesh when it is used?

Installation of heavy stone cage meshs:

1. The long side of the steel cage should be perpendicular to the slope direction.

2. Connect the sides of the heavy stone cage net with stranded steel wire. Procedure for twisted wire: first cut a long enough length of wire, loop it onto the grid and twist it; continue to tighten the alternating single and double loops every 150 mm on each metal grid. Finally, the tail end of the stranded steel wire is fixed on the metal grid by looping or stranding. Place the partition in a vertical position and connect the partition to the side panel with steel wire in the same way.

3. Combine the single struct

ures of the heavy stone cage mesh before placing, take out the folded unit from the strapping bag and place it on the solid and flat ground, then unfold and flatten it into the original shape, and fold it along the line from the edge. Connect the folds. Heavy-duty gabion nets should be assembled step by step, with the sides, tails and spaces erected to ensure that all creases are in front and the top of each side is level

4, assembled heavy stone cage network switch rules, straight lines, stranded joints are firm.

5. The installation of heavy stone cage meshs is carried out under the guidance of professional technicians.