20 mesh stainless steel filter mesh is a special use of wire mesh that can be used in printing industry and filtration.
The requirement for stainless steel filter mesh is that the mesh is square. The angle between the two meridians of the adjacent line is 90 degrees. Permeability is relatively high. The mesh surface should not have a joint knot. The mesh is also relatively uniform. The degree of friction is also relatively strong. The recovery rate of the stretch is also relatively small. More resistant to acid and alkali. Will not change the intensity due to the influence of ultraviolet light. Stainless steel wire mesh is often referred to as ultra-thin wire cloth.
20 mesh stainless steel filter mesh for direct plate making. It is possible that the surface is a
curved surface or a substrate of other shapes. More suitable for use in harsh environments.
What are the industries that can be used for 20 mesh stainless steel filter mesh filtration?
1. Can be printed. The stainless steel filter mesh itself can be used as a printing net. For example, the steering wheel in the printing automobile manufacturing industry. Or the letters on the computer keyboard. Or maybe the lines on the sun board and so on.
2. Can be filtered. Can be used in wastewater plants, oil refineries, chemical plants, paper mills, flour mills, etc. Its corrosion resistance and oxidation resistance are not affected in certain environments and are guaranteed to be used.
Leave a Comment