The use of polyester mesh has been a lot of industry. The weaving method of the polyester mesh is still a performance characteristic, I believe that everyone has almost understood. Polyester meshs in the production of experts know more is the maishi manufacturers. Below is the maishi manufacturer to explain the use of polyester mesh.
1. Correction of the front paper machine of the polyester mesh, the rotation of each roller is flexible. Put the polyester mesh into the workshop one week in advance. To adapt to temperature changes.
2. Avoid contact with sharp edges when lifting the polyester mesh. It is strictly forbidden to smoke and open fire near the polyester mesh.
3. The temperature of the polyester mesh should not exceed 150 °C, the tension of the single-layer polyester molding mesh is controlled at 40-50N/cm, and the tension of the polyester molding mesh of double-layer or more is controlled at 60-70N/cm. At 15N-25N/CM.
4. Due to the special nature of polyester mesh raw materials, please pay attention to the scientific use of cleaning agent when cleaning polyester mesh. Chemical cleaning must use neutral or 5% cold lye solution with soft brush to wash, then rinse immediately with water.
5. Storage conditions of polyester mesh: temperature is about 20 °C, relative humidity is about 50%. Due to different temperature, humidity and storage time in different regions, the length dimension of polyester mesh will change, try to be the first-come polyester. The first use of the net. Polyester mesh in the initial operation of 24-28 hours, there will be a certain elongation, this process should pay attention to adjust the polyester mesh tension, after which will be stable.
The use of polyester meshs is already the above. If there is anything you don't understand, or if you want to contact. You can contact us.
More popular articles
Leave a Comment